Boundary Dimensions
d 140 mm Bore diameter
D 300 mm Outside diameter
T 107.75 mm Total width
B 102 mm Width of inner ring
C 85 mm Width of outer ring
Cup r (min.) 4 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 1210000 N Basic dynamic load rating
C0r 1440000 N Basic static load rating
Speeds
Grease 1200 min-1 Grease lubrication
Oil (Oil-bath) 1600 min-1 Oil-bath lubrication
Dimensions
a 76.4 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 172 mm Diameter of shaft abutment
Db (min.) 281 mm Diameter of housing abutment
Da (min.) 246 mm Diameter of housing abutment
Da (max.) 282 mm Diameter of housing abutment
Sa 9 mm Minimum width of space required in housing on large side face
Sb 22.5 mm Minimum width of space required in housing on small side face
db (max.) 177 mm Diameter of shaft abutment
ra (max.) 4 mm Radius of shaft or housing fillet of inner ring
ra (max.) 3 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.37 Constant
Y0 0.88 Axial load Factors
Y1 1.6 Axial load Factors
Mass
(approx.) 33.9 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
32328 bearing
PREVIOUS:ZWZ 30328 NEXT:ZWZ HR32230J
